Code: LC026
Features
-Stainless steel collector coil capable of removing 1.84 L of water in 24 hours and holding 2.5 L of ice before defrosting
-Two 1/3 hp HCFC/CFC-free refrigeration compressors cool the collector to -84° C (-121° F) and work in concert with a 1000-watt heater to cool and heat fluid medium circulating through channels in the shelf. Not for use with samples containing methanol or ethanol
-Processing shelf, 12.4″ w x 14.5″ d (31.5 x 36.8 cm). Spacing between shelf and top of chamber accommodates containers with stoppers up to 148 mm maximum height
-One probe for monitoring temperature of sample in chamber
-Temperature ramp and hold programming from -55° C to +50° C (-67° F to +122° F) and -75° C (-103° F) during pre-freezing. Controls temperature to ±1° C of set point. Memory to store 30 programs with 16 segments each including number of steps, ramp rate, shelf temperature, hold time and vacuum level
-Full color, 5″ capacitive touchscreen with Lyo-Works™ OS:
-Real time display of collector temperature and vacuum level
-Creation and storage for up to 30 programs with up to 16 steps each. Ability to set ramp rate, shelf temperature, shelf temperature time and vacuum set point per step
-Manual start-up buttons for collector and shelf temperature control and vacuum pull down
-Alerts, diagnostic tests, user manual and defrost control
-Data logging stores and displays data in table or graph format, and may be exported via USB or Ethernet
-Settings include language (English, Spanish, French, German, Chinese, Japanese, Portuguese, or Italian), time, time zone, temperature (° C or ° F), and vacuum (mBar, Torr, or Pa).
-Alerts can be emailed to user-entered addresses via Ethernet connection
-Vacuum pump maintenance alert
-Security lock-out
-Pneumatic stoppering mechanism with diaphragm and plate. No compressed gas is required
-Stoppering control knob, vacuum release control knob and 1/8″ OD user-supplied sterile/inert gas backfill port
-Four left side-mounted neoprene valves with molded plastic knobs and fittings that accommodate 1/2″ and 3/4″ flask adapters
-USB port and Ethernet connection
-Electrical receptacle for vacuum pump
-Hot gas defrost with stainless steel drain pan, silicone drain hose and auto shut off at +60° C (+140° F)
-Vacuum control valve
-Vacuum break valve
-Stainless steel and powder-coated steel exterior
-Clear acrylic door, 1″ thick, with silicone gasket and latch 3/4″ OD vacuum connection. 36″ long, 3/4″ ID vacuum hose with two clamps
Options Include
Region-specific electrical plug configurations
Required Accessories (Not Included)
Vacuum pump with a displacement of at least 98 L/min, 0.002 mBar ultimate pressure and fitting for 3/4″ ID vacuum hose
Freeze dry glassware if not bulk freeze drying
Reviews
There are no reviews yet.